1. Make sure all parts are included. You should have:
a. An optics mount
b. 2x mounting screws
2. Make sure the pistol is unloaded and safe, then remove the top plate.
3. Install your optic onto the mount using the included screws. Do not exceed 6.5 in-lbs! Inspect the bottom of the mount to make sure the screws don’t protrude below the bottom of the mount as shown:
4. Install the optics mount onto the pistol, using the original screws. Do not exceed 12 in-lbs!
5. Perform a function check and make sure the pistol is safe to fire.