This table is not comprehensive. I’ve only included the most popular optics below. If the optic you want to use is not listed below, first check this website, which is maintained with up to date information: https://www.optics-trade.eu/blog/footprints-on-red-dot-sights/
If you still aren’t sure which mount to use, or if I don’t make a mount for your optic, please reach out using the Contact Us page. We’re constantly building out our catalog, and will update this page as needed! If you’ve tested with an optic that isn’t on this list, please reach out so I can add it.
Use the table below to search for your optic.
| Optics Pattern | Optic | Notes |
|---|---|---|
| Docter | Docter Sight | The Docter brand red dots are no longer manufactured, but is used as the standard for this mounting pattern. |
| Docter | Burris Fastfire | All versions of the Burris fast fire have been tested on Rucker Machine optics mounts |
| Docter | Vortex Venom | The Vortex Venom uses different mounting screws than any of the other Docter pattern optics. You’ll need to purchase screws from the Mounting Screws page. |
| Docter | Vortex Viper | |
| Aimpoint Micro | Aimpoint H1 | |
| Aimpoint Micro | Aimpoint T1 | |
| Aimpoint Micro | Aimpoint H2 | I have not tested the second generation of aimpoint micro optics. If you run into fitment problems with yours, please let me know. |
| Aimpoint Micro | Aimpoint T2 | I have not tested the second generation of aimpoint micro optics. If you run into fitment problems with yours, please let me know. |
| Aimpoint Micro | Holosun 403 | The Holosun 403 product line includes models 403B, 403C, 403GL, 403R, etc - NOTE: The 403R is slightly too long to work with the standard Ruger Mk. iii/iv mount. Please see the installation instructions page for details |
| Aimpoint Micro | Holosun 503 | The Holosun 503 product line includes models 503BU, 503C, 503CU, 503FL, 503G, 503GU, 503R, etc |
| Aimpoint Micro | Holosun 515 | The Holosun 515 product line includes models 515C, 515CM, 515CT, 515GM, 515GT, etc |
| Aimpoint Micro | Holosun 530 | The Holosun 530 product line includes models 530C, 530G, etc |
| Aimpoint Micro | Vortex Sparc | |
| Aimpoint Micro | Sig Romeo5 | |
| Aimpoint ACRO | Aimpoint ACRO | |
| Aimpoint ACRO | Griffin Micro Sight | |
| Aimpoint ACRO | Steiner MPS | This optic is slightly shorter in length than the ACRO, which leaves a small gap in front of the optic, exposing a little bit of the dovetail |
| Shield RMS | Shield RMS | The Shield RMS product line includes models RMS, RMSc, RMSw, RMS2 |
| Shield RMS | Shield SMS | The Shield SMS product line includes models SMS, SMSc, SMSx, SMS2 |
| Shield RMS | Sig Sauer RomeoZero | The Romeo Zero comes with screws that are too long. Use the included mounting screws that ship with your Rucker Machine mount. Some new versions of this optic are shipped with a sheet metal shroud that the optic sits in. This shroud is not compatible with my mounts without modification. The locating pins on my mounts are on the front of the optic to be compatible with as many optics as possible, and this sheet metal shroud only has holes in it for the rear pins. It will need to be modified by drilling two clearance holes in order to be used. |
| Shield RMS | Sig Sauer RomeoZero Elite | This is a new version of the RomeoZero. |
| Shield RMS | Sig Sauer Romeo X Compact | |
| Shield RMS | Holosun 407K | This optic is slightly different from the Shield RMS standard, but Rucker Machine mounts are designed to accommodate it. |
| Shield RMS | Holosun 507K | This optic is slightly different from the Shield RMS standard, but Rucker Machine mounts are designed to accommodate it. |
| Shield RMS | Holosun 407K X2 | This optic is slightly different from the Shield RMS standard, but Rucker Machine mounts are designed to accommodate it. |
| Shield RMS | Holosun 507K X2 | This optic is slightly different from the Shield RMS standard, but Rucker Machine mounts are designed to accommodate it. |
| Shield RMS | Holosun EPS | This optic is slightly different from the Shield RMS standard, but Rucker Machine mounts are designed to accommodate it. However, it is wider, and will hang off the edges of the mount. (The mount is 24mm wide, the optic is 28.8mm wide) |
| Shield RMS | Holosun EPS Carry | This optic is slightly different from the Shield RMS standard, but Rucker Machine mounts are designed to accommodate it. However, it is slightly wider, and will hang off the edges of the mount. (The mount is 24mm wide, the optic is 25.3mm wide) |
| Shield RMS | JP Rifles Jpoint | Also available with Trijicon branding. This optic requires M3x8 button head screws, which I do not currently keep in stock. |
| Shield RMS | Crimson Trace CTS-1550 | This optic is based on the Jpoint. It requires M3x8 button head screws, which I do not currently keep in stock. |
| Shield RMS | Crimson Trace Rad Micro | |
| Shield RMS | Vortex Defender CCW | This optic is based on the Jpoint. It requires M3x8 button head screws, which I do not currently keep in stock. |
| Shield RMS | Swampfox Sentinel | |
| RMR | Trijicon RMR | |
| RMR | Trijicon RMS | |
| RMR | Holosun 407C | The 407A is the non-solar panel version of the 407C |
| RMR | Holosun 407C V2 | The 407A is the non-solar panel version of the 407C |
| RMR | Holosun 407C X2 | The 407A is the non-solar panel version of the 407C |
| RMR | Holosun 507C | |
| RMR | Holosun 507C V2 | |
| RMR | Holosun 507C X2 | |
| RMR | Holosun HS507COMP | |
| RMR | Holosun 508T | |
| RMR | Holosun 508T X2 | |
| RMR | Swampfox Kingslayer | |
| RMR | Swapfox Liberty | |
| RMR | Swapfox Justice | |
| RMR | GRITR Caracara | |
| RMR | Sig Sauer RomeoZero-R | This is a new version of the Sig RomeoZero. See details here: https://www.sigsauer.com/red-dot-revolution |
| Leupold Delta Point Pro | Leupold Delta Point Pro | The Leupold Deltapoint Pro uses a modified Shield RMS mounting pattern. I make a special version of my mounts to fit this optic specifically. |
| Leupold Delta Point Pro | EOTECH EFLX | The EOTECH EFLX is slightly wider than the Leupold Delta Point Pro, and will hang over the edge of the mount slightly |
| Leupold Delta Point Pro | EOTECH EFLX | The EOTECH EFLX is slightly wider than the Leupold Delta Point Pro, and will hang over the edge of the mount slightly |
| Leupold Delta Point Pro | Sig Sauer RomeoZero Pro | This is a new version of the Sig RomeoZero. See details here: https://www.sigsauer.com/red-dot-revolution |
| Leupold Delta Point Pro | Sig Sauer Romeo X Pro |