Make sure all parts are included. Use the table below to take inventory. If the inventory does not include screws to attach your optic to the mount, please use the screws that came with your optic.
If you have the Aimpoint Micro mount, see the instructions specific for that mount here: Aimpoint Micro
Make sure your rifle is unloaded and safe before continuing.
Install your optic onto the mount. Use the table below for torque values, make sure not to exceed those values! Then make sure the screws do not protrude below the bottom of the mount, as shown in the picture below.
Install your optic and mount onto your rifle. Do not exceed 8 in-lbs!
Perform a function check and make sure the rifle is safe to fire.
| Optics footprint | Inventory | Optic Screw Torque Value |
| Aimpoint Micro | See Aimpoint Micro specific installation instructions page | |
| Docter | Optics mount 2x 6-32 mounting screws 4x mount mounting screws (6-48 flat head, torx drive screws) | Included 6-32 screws: 6.5 in-lbs |
| Shield | Optics mount 2x M3 mounting screws 4x mount mounting screws (6-48 flat head, torx drive screws) | Included M3 screws: 4.5 in-lbs |
| RMR | Optics mount 4x mount mounting screws (6-48 flat head, torx drive screws) | 6-32 screws that came with your optic: 6.5 in-lbs |
| Deltapoint Pro | Optics mount 4x mount mounting screws (6-48 flat head, torx drive screws) | M4 screws that came with your optic: 6 in-lbs |