Make sure all parts are included. Use the table below to take inventory. If the inventory does not include screws to attach your optic to the mount, please use the screws that came with your optic.
Make sure your rifle is unloaded and safe before continuing.
Remove the rear sight from your barrel.
Install your optic onto the mount. Use the table below for torque values, make sure not to exceed those values! Then make sure the screws do not protrude below the bottom of the mount.
Install your optic and mount onto your rifle, using the included torx head screws. Do not exceed 8 in-lbs! The barrel is tapered, and the mount has a matching tapered profile on the bottom. Make sure the mount is mounted with the correct end forward.
Perform a function check and make sure the rifle is safe to fire.
| Optics footprint | Inventory | Optic Screw Torque Value |
| Docter | Optics mount 2x optics mounting screws (flat head, 6-32 hex drive screws) 2x mount mounting screws (flat head, 6-48 torx drive screws) | Included 6-32 screws: 6 in-lbs |
| Shield | Optics mount 2x optics mounting screws (flat head, M3 hex drive screws) 2x mount mounting screws (flat head, 6-48 torx drive screws) | Included M3 screws: 4.5 in-lbs |
| RMR | Optics mount 2x mount mounting screws (flat head, 6-48 torx drive screws) | 6-32 screws that came with your optic: 6.5 in-lbs |
| Deltapoint Pro | Optics mount 2x mount mounting screws (flat head, 6-48 torx drive screws) | M4 screws that came with your optic: 6 in-lbs |