Ruger Pistol Aimpoint Acro Pattern Optics Mount

  1. Make sure al parts are included. You should have:
    • An optics mount
    • 2x mount mounting screws (flat head, torx drive screws)
  2. Make sure the pistol is unloaded and safe, then remove any existing optics mounts and/or screws.
  3. Install the mount onto your pistol using the included torx drive screws. Do not exceed 7 in-lbs!
  4. Install your optic onto the mount using the manufacturers instructions.
  5. Perform a function check and make sure the pistol is safe to fire.