Make sure all parts are included. Use the table below to take inventory. If the inventory does not include screws to attach your optic to the mount, please use the screws that came with your optic.
Make sure your pistol is unloaded and safe before continuing.
If you have an Aimpoint Micro mount, please see specific instructions here: Aimpoint Micro Mount
Install your optic onto the mount. Use the table below for torque values, make sure not to exceed those values! Then make sure the screws do not protrude below the bottom of the mount, as shown in the picture below.
Install your optic and mount onto your pistol using the included torx drive screws.Do not exceed 7 in-lbs!
Perform a function check and make sure the pistol is safe to fire.
| Optics footprint | Inventory | Optic Screw Torque Value |
| Aimpoint Acro | Optics mount 2x mount mounting screws (6-48 flat head, torx drive screws) | See optic manufacturers instructions |
| Aimpoint Micro See additional instructions here | Optics mount 2x mount mounting screws (6-48 flat head, torx drive screws) 4x M3 mount mounting screws | Included M3 screws: 5 in-lbs |
| Docter | Optics mount 2x 6-32 mounting screws 2x mount mounting screws (6-48 flat head, torx drive screws) | Included 6-32 screws: 6.5 in-lbs |
| Shield | Optics mount 2x M3 mounting screws 2x mount mounting screws (6-48 flat head, torx drive screws) | Included M3 screws: 4.5 in-lbs |
| RMR | Optics mount 2x mount mounting screws (6-48 flat head, torx drive screws) | 6-32 screws that came with your optic: 6.5 in-lbs |
| Deltapoint Pro | Optics mount 2x mount mounting screws (6-48 flat head, torx drive screws) | M4 screws that came with your optic: 6 in-lbs |